Agri-Fab Platinum 45-0550 Page 2 Assembly Instructions Manual Download

Page: 2 / 16

SafeTY RULeS

Remember, any equipment can cause injury if operated improperly or if the user does not understand how to operate the
equipment. Exercise caution at all times when using this equipment.

Look for this symbol to point out
important safety precautions. It means—

aTTeNTION!

Become alert! Your safety is

involved.

•

NEVER allow anyone to operate the leaf blade without proper instructions.

•

NEVER permit children to operate the leaf blade.

•

NEVER push the leaf blade too close to a fire.

•

ALWAYS wear eye protection while operating the leaf blade.

•

Only use leaf blade for raking and pushing leaves.

•

Refer to the vehicle owners manual for instructions on safe operation on slopes.

•

Stay alert for holes, tree roots, or other hidden hazards.

•

This leaf blade is NOT meant for street or highway use. Watch for traffic when raking near roadways.

•

Keep all nuts and bolts tight.

•

The leaf blade should be stopped and inspected for damage after striking a foreign object. Repair any damage before
operating the equipment.

•

Follow maintenance instructions as outlined in this manual.

NOTE: The Leaf Blade works best in conjunction

with the Leaf Blower.

40240

PINCH POINT

CAUTION

NOTICE

This equipment is designed

for leaf removal only. Do

not move other objects.
Read the owner’s manual

for additional operating

instructions.

agri-fab.com

800-448-9282

Reorder No. 3-71

Summary of Contents for Platinum 45-0550

















Search results

Summary of Contents for Platinum 45-0550

Reviews:

Related manuals for Platinum 45-0550

Brands by name

Popular brands

Agri-Fab Platinum 45-0550, Assembly Instructions Manual

Search results

Summary of Contents for Platinum 45-0550

Reviews:

Related manuals for Platinum 45-0550

Brands by name

Popular brands