background image

2

TABLE OF CONTENTS

ACCESSORIES .................................................................................................................................................................... 2
SAFETY RULES ................................................................................................................................................................... 3
FULL SIZE HARDWARE CHART ......................................................................................................................................... 4
CARTON CONTENTS .......................................................................................................................................................... 6
ASSEMBLY ........................................................................................................................................................................... 7
OPERATION ....................................................................................................................................................................... 25
MAINTENANCE ................................................................................................................................................................. 26
SERVICE AND ADJUSTMENTS ........................................................................................................................................ 27
STORAGE .......................................................................................................................................................................... 28
TROUBLESHOOTING ........................................................................................................................................................ 28
REPAIR  PARTS ILLUSTRATION ............................................................................................................................. 30,32,34
REPAIR PARTS LIST ............................................................................................................................................... 31,33,34
SLOPE GUIDE ................................................................................................................................................................... 35
PARTS ORDERING/SERVICE ........................................................................................................................BACK COVER

IMPORTANT:

Rear wheel weights and tire chains are required to provide extra traction and 
stability when using this snow thrower attachment. These items are available 
where you purchased your tractor.

WHEEL WEIGHTS

TIRE CHAINS

Summary of Contents for LST42B





































Reviews: