12
FIGURE 20
VIEW OF BOTTOM
5. Attach the clutch/idler assembly to the tractor frame as
follows. Hook the assembly's notched arms onto the two
shoulder bolts you assembled to the inside of the tractor
frame. Lift the front of the assembly and attach it to the
R.H. and L.H. hanger brackets using two pivot lock pins
and 1/8" hairpin cotters. See fi gure 21.
ELECTRIC ATTACHMENT CLUTCHES
1. Turn the clutch/idler assembly upside down and place
the extra tensioning chain through the left front hole as
shown in fi gure 19.
FIGURE 19
FIGURE 21
RIGHT SIDE VIEW
2. Hook the loose spring through the end of the tensioning
chain. See fi gure 20.
3. Hook the other end of the spring onto the bottom of the
bolt and nut which secure the idler pulley to the upper
idler arm. Hold the bolt head and assemble a 3/8" hex
lock nut onto the bolt, leaving it loose enough for the
spring to pivot freely between the two nuts. See fi gure
20.
4. Attach a 3/32" hairpin cotter to the chain, placing it in
the fi fth link from the spring. See fi gure 20.
CHAIN
(L.H. SIDE)
3/32" HAIR
COTTER PIN
5TH LINK
LEFT
SIDE
3/8" HEX
LOCK NUT
SPRING
RIGHT
SIDE
TENSIONING CHAIN
PIVOT LOCK PIN
(use second hole)
1/8" HAIRPIN COTTER
Summary of Contents for LST 42A
Page 21: ...21 NOTES...
Page 22: ...22 PARTS REPAIR PARTS FOR MODEL LST 42A 42 SNOW THROWER 82 111...
Page 24: ...24 REPAIR PARTS FOR MODEL LST 42A 42 SNOW THROWER...
Page 26: ...26...
