5
7. Assemble a single spool assembly, a " long spacer, a
double spool assembly, a .33" long spacer and a 3/4"
flat washer onto the short end of the shaft. See figure
4.
FIGURE 5
9. Assemble an end plate to the end of the tray using four
5/6" x 3/4" hex bolts and four 5/6" nylock nuts. Repeat
for other end.
Do not tighten till step 20.
See figure
6.
FIGURE 6
FIGURE 7
8. Assemble a 2.38" long spacer, a 3/4" flat washer, the
middle brace, a 3/4" flat washer, a 3.70" long spacer,
a single spool assembly, a .33" long spacer, a double
spool assembly, a 1.33" long spacer and a 3/4" flat
washer onto the long end of the shaft. The bent lip of
the middle brace must face the short end of the shaft.
See figure 5.
FIGURE 4
0. Assemble the tongue to the tray, placing the slot's lock-
ing notch to the front. Use two 3/8" x " hex bolts, two
3/8" x -/4" hex bolts, four /4" long spacers, and four
3/8" nylock nuts as shown in figure 7.
Tighten.
SINGLE SPOOL
ASSEMBLY
DOUBLE SPOOL
ASSEMBLY
1" LONG
SPACER (S)
1.33" LONG
SPACER (T)
3/4" FLAT
WASHER (O)
SHORT END
2.38" LONG
SPACER (Q)
1.33" LONG
SPACER (T)
1.33" LONG
SPACER (T)
3/4" FLAT
WASHER (O)
MIDDLE
BRACE
3.70" LONG
SPACER (R)
3/4" FLAT
WASHER (O)
SINGLE SPOOL
ASSEMBLY
DOUBLE SPOOL
ASSEMBLY
3/8" x 1"
HEX BOLT (D)
3/8" x 1-1/4"
HEX BOLT (C)
1/4" LONG
SPACERS (P)
3/8" NYLOCK
NUT (J)
LOCKING
NOTCH
5/16" x 3/4"
HEX BOLT (E)
5/16" NYLOCK
NUT (K)
ENGLISH
Summary of Contents for 45-0298
Page 17: ...17 NOTES...
