4
ASSEMBLY INSTRUCTIONS
FIGURE 2
5.
Fasten the ends of the hitch arms together using two
5/16" x 1-1/4" hex bolts and 5/16" hex nuts.
Do not
tighten yet.
See figure 3.
6.
Assemble the hitch brackets to the hitch arms using
two 5/16" x 2" hex bolts and 5/16" hex nuts. Position
each bolt behind one of the cross bolts in the hitch
arms.
Do not tighten yet.
See figure 3.
TOOLS REQUIRED FOR ASSEMBLY
(2) 1/2" Wrenches
(1) Screwdriver
(1) Pliers
(1) Hammer
4.
Assemble a hitch arm to the inside of a frame tube
underneath the tank. Use two 5/16" x 2" hex bolts and
5/16" hex nuts as shown in figure 2.
Do not tighten
yet.
Repeat for other side.
1.
Remove all items from carton and lay out as shown
on pages 2 and 3.
2.
Assemble the axle through the large holes in the
frame tubes. If the axle will not fit, slightly loosen the
bolts in the frame tubes to align the holes. Retighten
the bolts after assembling axle. See figure 1.
3.
Assemble a 1/2" flat washer, a spacer, a second 1/2"
flat washer, a wheel (valve stem facing out) and a
third 1/2" flat washer onto the axle. Lightly tap a hub
cap onto the end of the axle. Repeat on other end of
axle. See figure 1.
FIGURE 3
FIGURE 1
1/2" FLAT
WASHER
SPACER
HUB CAP
5/16" x 2"
HEX BOLT
5/16" HEX NUT
HITCH ARM
5/16" x 2"
HEX BOLT
5/16" HEX NUT
5/16" x 1-1/4"
HEX BOLT
5/16" HEX NUT
