Agri-Fab 45-02183, Manual

Page: 4 / 12

4
5. Now tighten the four bolts from step 3.
6. Assemble a bag rod clip (E) to the inside of each lower
handle tube using a 1/4" x 1-1/4" hex bolt (A) and a 1/4"
nylock nut (D) as shown. The clips should face towards
the sweeper housing. See figure 4.
D
E
A
7. Slide the bent bag rod (6) through the stitched bag flap
on the top of the hopper bag (2) as shown in figure 5.
8. Slide the lower bag rod (5) through the stitched bag flap
on the bottom of the hopper bag as shown in figure 5.
2
5
6
9. Assemble the two plastic rod caps (F) to the rod ends
of the lower bag rod (5). See figure 6 (bag removed for
clarity)
F
5
FIGURE 4
FIGURE 5
FIGURE 6
4. Assemble the upper handle tube (3) over the handle leg
stand tubes (4) . Align holes in handle and assemble
the bag rod clips (E) to the handle as shown and fasten
with 1/4" x 1-1/4" hex bolts (A) and nylock nuts (D). See
figure 3.
3
E
D
A
4
FIGURE 3