BE-TMSXXXX USER MANUAL
21
BE-TMSxxxx
USAGE INSTRUCTIONS CONT.
WARNING
Avoid letting the Mulcher rotate idly. During work, avoid making bends with the
Mulcher lowered and do not work in reverse. It is mandatory to always lift the Mulcher when
changing direction or reversing the drive.
During transportation and any time when it becomes necessary to lift the Mulcher, it is necessary to adjust the
tractor lifting unit so that the Mulcher itself is lifted more than about 30-35 cm from the ground.
Avoid driving on public roads when the Mulcher is dirty with earth, grass or at any time when it produces dirt or
obstructs the traffic on the roads.
Fig. 12
After use
A few guidelines must be complied with when the work is complete, in order to make sure the Mulcher is
stable when released from the tractor:
• Move to the recovery area of the Mulcher, making sure that the supporting surface is flat and free from
obstructing material.
• Place the Mulcher on the ground by lowering the bearing levers of the tractor lifter.
• Raise the rear roller so that the Mulcher rests on the slides acting on the third point.
• Switch the tractor off and engage the parking brake.
• Before leaving the driver’s seat of the tractor remove the ignition key from the dashboard.
• Disconnect the drive shaft that connects the multiplier with the tractor PTO.
• Release the adjustable arm from the upper third point by releasing the appropriate pins and split pins.
• Release the chains and tensioners of the two tractor bars.
• Release the pins from the bars by releasing the relevant split pins.
• Climb into the driver’s seat of the tractor, start up and move the tractor away from the Mulcher.
Store the equipment, preferably in a covered area, on a suitable and flat surface. Follow the instructions in
the paragraph “Making idle” of this manual.
