AGRETO HFM II
©
©
©
© AGRETO
AGRETO
AGRETO
AGRETO electronics GmbH
electronics GmbH
electronics GmbH
electronics GmbH
26
26
26
26
21.4
Freezing of displayed values (Hold function)
If you cannot see the display while the moisture measurement, for example if
you measure a bale on a trailer, you can freeze the currently displayed moisture
value for 5 seconds by pressing the [Moisture] key. During this time, the current
display is frozen and displayed and the held value is displayed with a non-
flashing decimal point. Then the device starts again with the automatic display
of the current measured value.
21.5
Forming averages
To form an average of several measurements of moisture, or to count the
number of measurements, proceed as follows:
Perform the initial measurement.
When the reading on the display is stable, press the button briefly
[Summing]. The displayed value is written to memory. On the display the
number of measurements that are already in memory appears for 5
seconds. Then the unit will return to the automatic display of the
moisture.
Repeat the process as many times as you like with different
measurements or measurements of several bales.
21.6
Retrieving the average value
To display the average of the stored measurements, proceed as follows:
Press and hold the [Summing] key for about 4 seconds.
The average moisture value of all stored measured values appears on
the display. This value is flashing alternating with the number of
measurements.
The total memory is not cleared.
To return to the current display, press the [Moisture] key.
21.7
Deleting the total memory
To delete the total memory manually turn the device off and on again. After
automatic turn off the total memory is not cleared.
