agratronix GMT-Grind, Operator'S Manual, Page: 8 / 48

CALCULATION OF THE AVERAGE VALUE
The GMT-Grind Grain Moisture Tester automatically calculates and displays
the average value of the last four measurements.
The average value is shown on the lower right hand corner of the display.
The current measurement value displays on the left.
For the first measurement, the average value will be the same as the current
measurement value. After the second measurement, the average value is
the average of the two measurements. When four or more measurements
have been made, the meter will always show the average of the last four
measurements.
The average measurement will remain in the memory after the meter is
turned off.
The average value is automatically reset when changing to a different grain.
Press and release the TEST button
and the testing countdown will begin.
When the display reaches zero,
the result is ready and average
measurement is updated. The current
moisture measurement is on the
left, and the average measurement
reading is on the right (see Figure 6).
After measuring, clean the test cell
using the wire brush that is included
with the GMT-Grind Grain Moisture
Tester kit (see Figure 7).
The cleaning of all grain from the
test cell is important, since the next
measurement may be inaccurate if
the test cell is not cleaned properly!
The tester will automatically turn off
when it is not in use.
Operation
10-4
Figure 6.
Reading
on the
display.
Figure 7.
Cleaning
the cell.