remote control photo or video, where you can enable the APP to start the built-in camera of the
system to take photos by long pressing this button. If you have selected remote-control video,
the watch will start to take videos after you press this button for the first time and stop to take
videos after you press this button again. If you long press this button, you exit the photo mode.
5.2.4
Find your phone:
This button allows you to active the function to find your phone by
long pressing it for 3 seconds. If you press this button, you will hear a ring tone (if the volume of
ring tone is on) which help you to find your phone. Phone vibration is not supported. Long
press this button, and you will exit this function.
5.2.5
Vibration on/off
: This button allows you to enter the interface for switching on or off
vibration by long pressing this button. By default, vibration is ON. When vibration is in OFF
state, the bracelet does not vibrate no matter what notification is received.
5.2.6
Power off
: Long press the button on the time interface for 3 seconds to enter the
secondary menus, and browse through these menus to switch to the Power Off option. Long
press this option to enter the Power Off interface. On this interface, switch from ON to OFF and
the numbers 5, 4, 3, 2, 1 will be displayed on the screen. After the number 1 is displayed, the
bracelet will be powered off.
5.2.7
Reset
: Among the secondary menus, select the Reset icon and long press it to enter the
Reset interface. On this interface, switch from Off to On, and the system will be reset and the
time and data of the watch will be reset to the factory settings.
5.2.8 Palming screen
-
on
: If you enable this function, the screen of the bracelet will light up
( automatically when you raise you wrist to help you view the time.
