6
Total Extension
Cord Size (AWG)
Cord Length (feet)
25
16
50
12
100
10
150
8
200
6
UNPACKING
Carefully remove the tool and all loose items from
the shipping container. Retain all packing materials
until after you have inspected and satisfactorily
operated the machine.
NOTE: An appropriate diamond blade must be
mounted to the machine before operating.
R e f e r t o t h e s e c t i o n o f t h i s m a n u a l :
“INSTALLING THE BLADE”
CARTON CONTENTS
Stone Cutting Circular Saw Machine
* Vacuum hose connector
* Parallel guide
* Quick-release water hose coupling
* L-hex wrench
DO NOT OPERATE THIS TOOL UNTIL YOU READ
AND UNDERSTAND THE ENTIRE INSTRUCTION
MANUAL.
dust absorption system and wear a suitable
dust protection mask and remove deposited
dust with a vacuum cleaner.
ELECTRICAL CONNECTION
The network voltage must conform to the voltage
indicated on the tool name plate. Under no
circumstances should the tool be used when the
power supply cable is damaged. A damaged cable
must be replaced immediately by an authorized
Customer Service Center. Do not try to repair the
damaged cable yourself. The use of damaged
power cables can lead to an electric shock.
INTENDED USE
This saw is designed exclusively for wet or dry
cutting of stone, concrete and masonry. This
machine should not be used for cutting other
materials. The machine should not be converted or
modified, e.g. for any other form of use, other than
as specified in these operating instructions. The
user shall be liable for damages and accidents due
to incorrect use.
EXTENSION CABLE
If an extension cable is required, it must have a
sufficient cross-section so as to prevent an
excessive drop in voltage or overheating. An
excessive drop in voltage reduces the output and
can lead to failure of the motor. The following table
shows you the correct cable diameter as a function
of the cable length for this machine. Use only U.L.
and CSA listed extension cables. Never use two
extension cables together. Instead, use one long
one.
