AGP EB12, Instruction Manual

Page: 9 / 20

9
STARTING AND STOPPING TOOL
Make sure that the power circuit voltage is the
same as that shown on the specification plate of
the machine and that switch is “OFF” before
connecting the tool to the power circuit.
Switching the machine on and off
To switch on:
Press the trigger switch to start.
To lock the switch on, press the lock pin next to the
switch.
For 1100W model
For 1800W model
To switch off
Squeeze and release the trigger switch to unlock
the switch and switch off.
After the machine has been switched off, the arbor
will still rotate for a time. Take care that parts of
your body do not come into contact with the
rotating parts or set the machine down while it is
still rotating!
SPEED CONTROL WHEEL
There is a progressive variable speed wheel. By
turning the wheel to the right,, the speed will
gradually increase.
For 1100W model
For 1800W model
HOW TO USE THE TOOL
•
Effective control of this powerful tool requires
two-handed operation at all times for
maximum control and safety.
•
Do not use this tool continuously over 30
minutes.
•
Protect your eyes from injury with safety
glasses or goggles.
OPERATION
The machine must reach full speed before
beveling/deburring begins.
•
Hold the machine keeping the support deck
flat and securely to the workpiece. From the
operator ’s perspective, the spindle is
Variable speed wheel
Variable speed wheel
On/off trigger
Lock Button
On/off trigger
Lock Button