9
MOTOR
Always check the nameplate to ensure the A.C.
current supply is the correct voltage for your
machine.
This tool will operate on voltage within plus or
minus 5 percent of that shown on the specification
plate on the tool. Refer to the specification plate on
your tool for proper voltage and current rating.
Do not operate your tool on a current on which the
voltage is not within correct limits.
If an extension cord is used, make sure the
conductor size is large enough to prevent
excessive voltage drop which will cause loss of
power and possible motor damage.
If an extension cord is to be used outdoors, it must
be marked with the suffix WA or W following the
cord type designation. For example – SJTW-A to
indicate it is acceptable for outdoor use. Always
choose the shortest possible cord.
EXTENSION CORD SELECTION
DRUM-TYPE POLISHER
included accessories
10 Arbor Spacer Discs (for fitting smaller wheels to
the arbor)
OPTIONAL ACCESSORIES
Surface Conditioning Flap Wheel (fine) 105 x
100 x 19mm
DRIVE PULLEY FOR BELTS
Hook and loop belt backing straps
Hook and Loop Surface Conditioning belt
Hook and Loop 120 grit Sandpaper belt
Hook and Loop Sanding Sponge Belt-Fine
INFLATABLE RUBBER SANDING DRUM
AIR PUMP FOR DRUM
Surface Conditioning Sleeve
Sanding Sponge Sleeve - Fine
Sanding Sponge Sleeve – Medium
Sandpaper Sleeve- 60 grit
Sandpaper Sleeve- 100 grit
Sandpaper Sleeve- 180 grit
FOREWORD
This Drum-Type Polisher is especially designed for
fast compounding, high polishing, buffing and
sanding of stainless steel and aluminum panels
and forms. There are many accessories for specific
applications and tasks.
ASSEMBLY
CAUTION: DISCONNECT TOOL FROM POWER
SOURCE. THE GUARD AND HANDLE:
Place the guard in position on the gearcase and
rotate to the desired angle. Tighten with the built-
in lever.
Total Extension
Cord Length (feet) Cord Size (AWG)
25
16
50
12
100
10
150
8
200
6
Summary of Contents for DP100
Page 16: ......
