Agora Models Shelby GT500 1967 Super Snake, Build Instructions

Page: 7 / 25

7
AGORA MODELS
Stage 24: Front Floor Pan
F I N I S H S E C U R I N G T H E F L O O R PA N T O T H E C H A S S I S
Make sure the tabs are flush with the chassis, then place 4 x TYPE
MD02 screws in the anchor points indicated in picture 4. Tighten
the screws, but be careful not to overtighten. Then place 2 x TYPE
MD06 screws in the anchor points located on each side of the
transmission tunnel, as shown in picture 5.
Finish by fixing 2 x TYPE MD06 screws on the raised, sloping
section of the assembly, as shown in picture 6.
4
5
6