AGORA
MODELS
26
S T E P 1
1
3
2
4
Take the spacer ring and align it over the wheel from Stage 79. There is
a hole on the ring with a corresponding peg on the wheel (arrows) to
ensure the correct fit.
Turn the wheel over so that the smaller side of the wheel centre is
facing you. Note that there are two rows for threading the spokes –
an inner row and an outer row. You’re going to start on the inner row.
Lower the ring onto the wheel and press firmly until it clicks into place.
Using tweezers, thread a type A spoke through a hole on the
inner row
. Direct the tip of the spoke through the diamond-shaped
opening slightly clockwise (coloured red above) so that the tip pokes
through to the opposite side.
Stage 80: Rear Left Wheel – Fitting More Spokes
Outer row
Inner row
Type A spoke
