AGM Global Vision
20
2.2.11 FLAT FIELD CORRECTION
Flat Field Correction (FFC) function can correct non-uniformity of display.
1. Hold
button to show the menu.
2. Select
FFC menu item and press
button to switch the FFC mode.
Auto:
The riflescope performs FFC automatically when switching on or
rebooting the camera.
Manual:
Hold
button in live view to correct the non-uniformity of display.
External:
Cover the lens cap, then hold
button in live view to correct the
non-uniformity of display.
3. Hold
button to confirm the setting and exit.
2.2.12 DISTANCE MEASUREMENT
The device can detect the distance between the target and the observation
position.
NOTE:
When measuring the distance, keep your hand and the position steady.
Otherwise, the accuracy may be affected.
1. Hold
button to show the menu.
2. Select menu item and press
button to enter the Distance Measurement
mode.
3. Press
button to go to the target setting interface.
1) Press
or
to select the target from Wolf (0.8m), Bear (3.0m),
Deer (1.2m), and Custom (1.8m). Each target preset can be modified from
0.1 to 9.9m.
2) Set the target and press
button to confirm.
4. Align the center of top mark with the edge of target top. Press
button.
The cursor blinks on the top edge of the target.
5. Align the center of bottom mark with the edge of target bottom. Press
.
The left top of the image displays the distance measurement result and the
height of the target.
NOTE:
Go to distance measurement interface, and press
button to view the result
of the previous measuring target.
2.2.13 HOT TRACKING
The device can detect the highest temperature spot in the scene and mark it
on display.
1. Hold
button to show the menu.
2. Select
/
and press
button to enable/disable hot spot mark
(marking the spot of highest temperature).
When the hot spot mark is enabled, the mark displays in the spot of the
highest temperature. When the scene changes, the mark moves.
