AGM Global Vision
18
NOTE:
When Reticle is enabled, the PIP view is the detail of crosshair.
When Reticle is not enabled, the PIP view is the detail of central part.
3. Press button to activate or deactivate PIP mode.
4. Hold button to exit.
If digital zoom is enabled, the PIP view also zooms. If the digital zoom ratio
exceeds 4, the PIP does not zoom.
You can quickly enable or disable the PIP function by holding down the
button.
2.2.8 RETICLE AND BORESIGHTING
Enable the reticle to aim at the target. Hold button in the view mode for 4
seconds, to display or hide the reticle.
1. Hold button to show the menu.
2. Select Reticle menu item. A reticle shows in the center of the view.
3. Press or buttons to select one of 5 reticle type. Then press button
to confirm.
NOTE:
The scale intervals of the Reticle 4 changes synchronously under the current
digital zoom. The value of one scale interval of the Reticle 4 is 6.75 MOA.
You can boresight the scope by moving the reticle on screen:
1. In Reticle menu press , , and buttons to move the reticle position.
The coordinate shows the current position of the reticle.
2. Hold button to save and exit.
FIGURE 2-7. RETICLE PATTERNS
RETICLE 1
RETICLE 2
RETICLE 3
RETICLE 4
RETICLE 5
FIGURE 2-8. BORESIGHT CORRECTION
Cursor Type : Reticle 1