AGM Global Vision
10
2.1.4 POWER ON AND OFF
Power On
Hold the POWER button for 5 seconds to power on the device. An image
will appear on the display.
Refer to the figure below for the main view of the monocular display.
Power Off
When the device is turned on, hold POWER button for 5 seconds to power
off the device.
2.1.5 SLEEP MODE
In the view mode, press the
button. After a few seconds, the display will
turn off. Press the
button again to exit the Sleep Mode.
2.1.6 THERMAL VIEW OBSERVATION
1. Power on the monocular.
2. Hold the monocular and make sure the eyepiece covers your eye.
3. Adjust the diopter adjustment knob until the OSD text or image is clear.
4. Point the monocular towards the target of the view.
5. Point the monocular towards the target of the view. Bring the object into
focus by turning the objective focus ring (only for Asp TM35-384 model).
HOT SPOT
BATTERY
DIGITAL ZOOM
STORAGE
FIGURE 2-3. THE DISPLAY MAIN VIEW
DIOPTER ADJUSTMENT KNOB
FOCUS RING
FIGURE 2-4. DIOPTER ADJUSTMENT KNOB AND FOCUS RING