
19
2 plug in the Ac Adapter
Connect the plug of AC adapter into the jack on the back of the system, and then plug the AC
adapter into the wall socket.
Set-up & Operations
1 Switching on your Speaker System
Press Play button on the panel or press
on/off
button on the remote control.
Press and hold
play
button on the panel for 2 seconds or press
on/off
button to turn to
standby mode.
2 charging your ipod™/iphone™
2.1 To insert a dock adapter: Select the correct dock adapter for your iPod™/iPhone™.
2.2 Using the correct dock adapter ensures the proper fit for your iPod™/iPhone™.
2.3 Gently press the iPod™/iPhone™ dock adapter into the dock.
2.4 Carefully place your iPod™/iPhone™ into the dock.
2.5 To remove / replace dock adapter, first remove your iPod™/iPhone™, then grip the insert and
pull gently upwards.
Note: When iPhone™ is docked, a message of “This accessory is not made to work with iPhone”
pops up on the iPhone™. Tap No to continue.
3 Listening to Your ipod™/iphone™
3.1 Make sure to use the correct dock adapter for your iPod™/iPhone™ and ensure that it is
properly docked into the Speaker System. Failure to do so may damage your iPod™/
iPhone™ and the loudspeaker.
3.2 When your iPod™/iPhone™ is docked in the system, it will be recharged until fully charged.
3.3 Press
MoDE
button until
ipod™
icon is on the screen.
3.4 Press
play / pause
button to listen to your iPod™/iPhone™ on the system.
3.5 Press the Previous button or Next button to play previous track or next track.
3.6 Press Volume Up button or Volume Down button to increase or decrease volume level.
Note: When iPhone™ is docked, a message of “This accessory is not made to work with iPhone”
pops up on the iPhone™. Tap No to continue.
4 Listening to non-docking ipod™/iphone™ or other portable audio devices
4.1 If you are using an iPod™/iPhone™ without a universal adapter or other portable audio
devices, you can still playback via the system using the AUX jack near the docking.
4.2 Plug a 3.5mm audio jack into the headphone jack or the line out on your device and the
other end of the patch cord into the AUX jack of 10398/10400.
4.3 Keep pressing the
MoDE
button to select
Line-in
to enable the line-in mode.
4.4 The
Line-in
icon will light up on the screen.
4.5 Turn on and play your device.
5 Listening to fM radio
5.1 Press the
Mode
button on the panel and select
radio
to listen FM Radio.
5.2 A
radio
icon will light up on the screen.
5.3 Press the
previous
button or
next
button to tune manually to next clear station from
87.5-108 MHz.
Summary of Contents for 10398
