Electrical Interfaces
AGD301 Product Manual Rev.2.0
Page 41
3.4.11 Interfaces X8, X9: CAN, RS232, RS485
Connectors X8 and X9 are serial RJ45 communication ports.
Figure 20: Serial Communication Connectors
Connector X8 and X9: CAN, RS232, RS485
Pin #
Name
Description
1
GND
Digital Ground
2
RS232_RX
RS232 input (product receive)
3
RS232_TX
RS232 output (product transmit)
4
RS485_B
RS485 bus, inverted
5
RS485_A
RS485 bus, not inverted
6
Sync
Reserved for future use
7
CAN_L
CAN bus, Low
8
CAN_H
CAN bus, High
Connector type
RJ45 LAN 10/100Base-T connector
Mating connector part number Any CAT5e compatible shielded connector
Cable
CAT5e or higher, standard Ethernet straight cable
Wiring
26 AWG, insulation rated for 100V
Dual port connector
The serial port is a dual-port RJ45 connector. The two ports have identical pinouts and
are interchangeable. Two ports are provided to support daisy chain connection of a CAN
bus or RS485. It can be also used to connect two types of communication channels at the
same time, instead of splitting a cable from a single RJ45 connector.
