6
V
BURNER COVER
FP3007
1
W
FIREPIT BASE
FP3008
1
X
FIREPIT TABLE TOP
FP3009
1
INSTALLATION
1. Carefully unpack all items from the box. Place the base in the final position. There must be a
minimum of 60.96 cm / 24 inches of clearance from the side of the table top to any combustible
walls.
2. Place the firepit tabletop onto the firepit base. Secure the tabletop to the firepit base by using
the 1/4 x 20 mm bolts and washers that are provided. See Figure 2.
Figure 2
3. Place the burner pan protective ring into the firepan/burner assembly as shown in Figure 3.
Align the holes in the burner pan protective ring with the pre-drilled holes on the firepan/burner
assembly. Secure the burner pan protective ring to the firepan/burner assembly by using the
M4 screws as shown in Figure 3.
Figure 3
