13
5.4 Knob Bracket Installation
The AGX-i6S has 2 knobs that can be changed from self-centering to non-self-centering.
1. Take the transmitter apart, then use a
screwdriver to remove the screws marked in
red.
2
2. Remove the PCB screws marked in red.
3
3. Remove the knob from the potentiometer and put
them in a safe place.
4
4. Install the bracket shown above and secure with
the screws provided.
5
5. Reassemble the parts keeping everything in
alignment. Then replace all the screws.
6. Place the fully assembled part back into its
original position and secure with the screws
.
6
