manualshive.com logo in svg

Agilent Technologies Varian MERCURY Series, Installation Planning

Share
Download
Agilent Technologies Varian MERCURY Series Installation Planning Download Page 31

01-999021-00  A0100

Installation Planning Guide

31

Chapter 4.

Installation Supplies

Sections in this chapter:

•

4.1 “Required Installation Supplies and Equipment”  next

•

4.2 “Recommended Installation Supplies and Equipment”   page 34

Certain supplies not provided by Varian, such as helium and nitrogen supplies, must be 
obtained by the customer before the Varian installation engineer can start the installation. 

“Required Installation Supplies and Equipment” on page 31

 lists and describes these 

supplies in detail.

4.1 Required Installation Supplies and Equipment

The installation engineer needs the following non-Varian supplies and equipment during 
installation:

•

Electrical power surge protector

•

Liquid helium supply

•

Liquid nitrogen supply

•

Helium gas supply

•

Nitrogen gas supply

•

Face mask and thermal gloves

•

Heat gun

•

Non-magnetic l adder

Locating a reliable local source of liquid helium and nitrogen is particularly important. As 
soon as possible after ordering a system, make arrangements for an initial delivery and an 
on-going supply of liquid helium and nitrogen.

Electrical Power Strip and Surge Protector

A six-outlet, 115-V or 220-V power strip is required to provide power for the host computer 
and peripherals, including plotter and CD-ROM drive. If possible, this power strip should 
provide surge suppression to protect the delicate electrical components of the host 
computer system. If enough 115-V or 220-V wall outlets are close enough to the host 
computer, the power strip is not required. Surge protection, however, is still recommended. 
Contact an electronic professional for advice on quality surge protection in your area.

Summary of Contents for Varian MERCURY Series






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands