manualshive.com logo in svg

Agilent Technologies Varian MERCURY Series, Installation Planning

Share
Download
Agilent Technologies Varian MERCURY Series Installation Planning Download Page 14

Chapter 2. Site Requirements

14

Installation Planning Guide

01-999021-00  A0100

2.1 Site Size 

The site must be large enough to allow free access to all sides of the system and magnet for 
operation, maintenance, and cryogenic service. 

Table 3

 and 

Table 4

 contain the dimensions 

of the system components, and 

Chapter 6, “NMR Room Layouts,” 

 contains floor plans 

recommended for the NMR laboratory area or room. These plans are suggestions and not 
specifications.

The cabinet is mounted on casters for easy movement, which allows the system to be placed 
in the smaller rooms, as long as there is sufficient space for the cabinets to be moved to gain 
access on all sides. For comfort and convenience, however, and to provide space for an 
automatic sample changer or other options, the larger rooms shown in 

Chapter 6, “NMR 

Room Layouts,” 

are highly recommended. The minimum dimensions do not include 

compensation for external magnetic and rf interference that may be present. Each 
individual site must be analyzed to ensure optimum system performance.

Table 3. Magnet Dimensions and Weights with Stand and Legs Attached*

Magnet type**
(MHz/mm)

Height
cm (in.)

Width
cm (in.)

Depth
cm (in.)

Operational Weight
kg (lb)

200/54

183 (72)

76 (30)

66 (26)

136 (300)

200/54 LH235

228 (90)

78 (31)

78 (31)

315 (693)

200/54 LH365

235 (92.5)

78 (31)

78 (31)

362 (796)

300/54

183 (72)

69 (27)

69 (27)

152 (335)

300/54 LH235

235 (92.5)

78 (31)

78 (31)

325 (715)

300/54 LH365

235 (92.5)

78 (31)

78 (31)

374 (823)

400/54

235 (92.5)

69 (27)

69 (27)

380 (836)

400/54 LH365

235 (92.5)

78 (31)

78 (31)

440 (968)

* Dimensions and weights are approximate and subject to change. Height dimensions do not include optional 
accessories such as a siphon or plow-out tube.

** Long-hold magnets are designated by “LH” and a number that represents hold time in days.

* Dimensions and weights are approximate and subject to change.

Table 4. MERCURY-VX Cabinet and Optional Components Dimensions and Weights*

Component

Height
cm (in.)

Width
cm (in.)

Depth
cm (in.)

Weight
kg (lb)

NMR Console

74 (29)

56 (22)

79 (31)

 91 (200)

Autosampler

71 (28)

34.3 (13.5)

34.3 (13.5)

17 (38)

Work Table

67 (26.5)

183 (72)

76 (30)

48 (107)

Summary of Contents for Varian MERCURY Series






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands