User’s and Service Guide U3047-90001
3
U3047AM12
Description
Description
The Agilent U3047AM12 is a Multiport Test Set that adds 12 ports to extend the 4-port network analyzer to
16 full crossbar test ports with N-Port calibration capability.
The Agilent U3047AM12 has the following key features:
•
12 test ports (1.85 mm male connectors)
•
Low Loss Mechanical RF switching
•
Frequency Range of Operation: 10 MHz - 67 GHz
•
Test Set I/O interface for operational control with the network analyzer. Option 551 is required for
N-port calibration. An external personal computer is not required.
The N5247A PNA-X and the N5227A PNA network analyzer will be referred to throughout this document as
the network analyzer. The U3047AM12 will be referred to as the test set.
Verifying the Shipment
To verify the contents shipped with your product, refer to the “Box Content List” included with the
shipment.
Inspect the shipping container. If the container or packing material is damaged, it should be kept until the
contents of the shipment have been checked mechanically and electrically. If there is physical damage
refer to
“Contacting Agilent” on page 78
. Keep the damaged shipping materials (if any) for inspection by
the carrier and an Agilent Technologies representative.
Summary of Contents for U3047AM12
Page 4: ...iv...
Page 7: ...User s and Service Guide U3047 90001 1 U3047AM12...
