3
IDP-7 Dry Scroll Vacuum Pump
DRAF
T 1/19/17
Installation
The IDP-7 is
NOT
intrinsically safe. Do not install or use
the pump in an environment exposed to atmospheric
agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk.
During operation, the following environmental
conditions must be respected:
Connect the pump to the power supply using an IEC-320
style power cord of at least 10 A capacity (see Table 2 on
page 13).
Use
In order to reach maximum vacuum, the pump must be
left running for at least 24 hours with the inlet sealed.
There are no special instructions for starting the pump; it
need only be switched on using the On/Off switch.
The optional inlet valve will open 30 seconds after the
pump is started.
There are no special instructions for stopping the pump; it
need only be disconnected from the electric power
source by the On/Off switch.
The optional inlet valve will close immediately after the
pump is stopped.
Maintenance
Personnel responsible for pump operation and mainte-
nance must be well-trained and aware of the accident
prevention rules.
If a pump is to be discarded, it must be disposed of in
accordance with specific national standards.
Disposal
Meaning of the
WEEE
logo found in labels.
The following symbol is applied in accordance with the
EC WEEE (Waste Electrical and Electronic Equipment)
Directive. This symbol (valid only in countries of the
European Community) indicates that the product it
applies to must NOT be disposed of together with ordi-
nary domestic or industrial waste but must be sent to a
differentiated waste collection system.
The end user is therefore invited to contact the supplier of
the device, whether the Parent Company or a retailer, to
initiate the collection and disposal process after checking
the contractual terms and conditions of sale.
For more information refer to: http://www.agilent.com/
environment/ product/ index.shtml.
Temperature:
+5
°
C to +40
°
C (41
°
F to 104
°
F)
Relative humidity:
0 to 95% (non-condensing)
CAUTION
When installing the vacuum pump it is
recommended that the pump be posi-
tioned in a way that the power switch
and power cord connection remain eas-
ily accessible to the user in order to be
available as an option to disconnect
power to the pump quickly if needed.
WARNING
The pump is designed for operation
with neutral or noncorrosive fluids. It
is absolutely forbidden to use it with
potentially explosive or inflammable
substances.
WARNING
❑
Death may result from contact with
high voltages. Always take extreme care
and observe the accident prevention
regulations in force.
❑
When machine is powered up,
be careful of moving parts and high
voltages.
❑
If you have to perform maintenance
on the pump after a considerable time
in operation, allow it to cool as the tem-
perature of the outer surface may be in
excess of 60
°
C.
❑
Always disconnect your power
supply to the pump before beginning
maintenance work.
NOTE
Before returning the pump to the factory
for repair, the “Request for Return”
sheet attached to this instruction man-
ual must be completed and sent to the
local sales office. A copy of the sheet
must be inserted in the pump package
before shipping.
