Agilent Technologies
8
If you have the “Adaptable” FID, re-tighten the capillary
column adapter with a 9/16-inch wrench. Install the FID
insulating cup over the capillary adapter.
9
Check the FID output at normal operating temperature. The
output should be stable and < 20.0 pA.
Warranty
The material contained in this document is provided “as is,” and is subject to being
changed, without notice, in future editions. Further, to the maximum extent permitted by
applicable law, Agilent disclaims all warranties, either express or implied, with regard to
this manual and any information contained herein, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose. Agilent shall not be
liable for errors or for incidental or consequential damages in connection with the
furnishing, use, or performance of this document or of any information contained herein.
Should Agilent and the user have a separate written agreement with warranty terms
covering the material in this document that conflict with these terms, the warranty terms
in the separate agreement shall control.
© Agilent Technologies, Inc., 2015
Printed in USA or China
First edition, November 2015
Agilent Technologies, Inc.
2850 Centerville Road
Wilmington, DE 19808-1610 USA
安捷伦科技 （上海）有限公司
上海市浦东新区外高桥保税区
英伦路 412 号
联系电话： （800）820 3278
G3431-90400
