Agilent Technologies G1157A User Manual Download Page 31

Page: 31 / 78

Agilent 1200 Series Valves

Maintenance, Repair, and Troubleshooting

Maintenance and Repair

Reassembling the valve head

Mount the new Rotor Seal (5) with the grooves facing the Stator Head (2).
The three pins on the Shaft Assembly fit into the matching holes in the
Rotor Seal only one way.

Mount the Stator Ring on the Shaft Assembly that the two pins fit to the
matching holes on the Valve body.

Assemble the Stator Head (2) that the pin in the Stator Ring fits to the
matching hole in the Stator Head.

Insert the Stator Screws (1). Turn each of the screws an equal amount until
the they are finger-tight, then tighten them another half turn.

Table 6

Rebuild kits and repair parts for Agilent 1200 Series valves

Description

part number

• Rebuilt kits

and rotor seals

Rebuild kit for G1157 (2 position/10 port valve)

0101-1359

Rebuild kit for G1158 (2 position/6 port valve)

0101-1358

Rebuild kit for G1159 (6 position selection valve)

0101-1290

Rebuild kit for G1160 (12 position/13 port valve)

0101-1288

Rotor seals for G1158 (2 position/6 port valve)

0100-1855 (Vespel)
0100-1854 (Tefzel)
0100-2233 (PEEK)

Rotor seal for G1162A (2 position/6 port micro
valve)

0100-2087

Rotor seal for G1163A (2 position/10 port micro
valve)

0101-1361

• Stator heads

Stator head for G1157 (2 position/10 port valve

0101-1362

Stator head for G1158 (2 position/6 port valve)

0100-1850

Stator head for G1159 (6 position selection valve)

0101-1364

Stator head for G1160 (12 position/13 port valve)

0101-1365

Stator head for G1162A (2 position/6 port micro
valve)

0100-2089

Stator head for G1163A (2 position/10 port micro
valve)

0101-1363

Summary of Contents for G1157A















































































Search results

Summary of Contents for G1157A

Reviews:

Related manuals for G1157A

Brands by name

Popular brands

Agilent Technologies G1157A, User Manual

Search results

Summary of Contents for G1157A

Reviews:

Related manuals for G1157A

Brands by name

Popular brands