Safety Practices and Hazards
Agilent Electrothermal Temperature Controller ETC 60 User’s Guide
7
1
Safety Practices and Hazards
Manufactured
The Electrothermal Temperature Controller (ETC) is manufactured by:
Anatech BV
Nieuwstadterweg 3
6136 KN Sittard (the Netherlands)
Verifying Safe State
The following general safety precautions must be observed during all phases of
operation, maintenance, and service of this instrument.
To ensure continued safety of the instrument after maintenance or service
procedures, verify the instrument is returned to a safe state for the user. This
includes running performance checks to verify the instruments safety systems are
functioning correctly. Check the general condition of the instrument during
operation for wear or signs of corrosion that are likely to inhibit function or safety.
Failure to comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended use of the
instrument. Agilent Technologies assumes no liability for the customer’s failure to
comply with these requirements.
