Agilent Technologies E8401A, User And Service Manual, Page: 25 / 66

Rack Mounting and Option Installation 23 Chapter 2
Rack Mounting the
Agilent E840xA
using Support Rails
This section contains instructions for mounting the Agilent E840xA
mainframe in an EIA cabinet using the Agilent E3664A support rail kit. The
E3664A kit can be used with any of the rack mount adapter options;
however, the E3664A is only compatible with Agilent cabinets. The
following procedures apply to all adapters, with adapter-specific
information noted where necessary.
Note
If you ordered Cable Tray Option 914, refer to
page 33
and install the tray
before rack mounting the mainframe.
Procedure
1. Attach the handles to the adapters using the m5x10 flat head screws
(Figure 2-1). Handles are included only with the Agilent E840xA
Standard adapters (Option 923).
Figure 2-1. Attaching Handles to the Adapters (Option 923 - kit p/n E8400-80923)
m5x10 Flat Head Screws