Agilent Technologies E5810B, User Manual

Page: 96 / 157

3 E5810B Web Access
Other Web Access Functions
78 E5810B User’s Guide
7
Configure the FTP parameters and filename:
•
Firmware FTP server Hostname or IP Address:
Enter the IP
address of the FTP server (for example, 192.6.143.21)
or enter the FTP server domain name, if a DNS server
is available and configured in the E5810B (for example,
ftp.agilent.com).
• User Login: Enter the login name for the FTP server.
• Password: Enter the password associated with the
login name.
•
Firmware File:
Enter the filename of the E5810B
firmware. The default filename is
e5810_B_latest_frimware.hex
. You may also need
to add the appropriate directory information to locate
the file on the FTP server.
8 Perform firmware update.
i Select Update Firmware to display the password dialog
box. Select
OK
to confirm the update and the E5810B
will attempt to download the firmware from the
FTP site.
ii
After you have confirmed the update, the E5810B front
panel should display the
Updating firmware…
message.
iii
The LAN LED should flash, indicating LAN activity is
taking place. The firmware for the E5810B is
approximately 12 MB and downloading time may vary,
depending on network connections.
iv After the firmware image has been downloaded into
the E5810B, the E5810B will automatically reboot and
display the
Rebooting E5810B...
message. The E5810B will
then begin a normal startup sequence.
N O T E
You can also directly access the Updating Firmware page on your E5810B
LAN/GPIB/USB Gateway page at
http://<IP_Address>/dynamicWebFile/firmware_update_login.php ,
where
<IP_Address>
is the IP address displayed on the front display
panel of the E5810B.