Rack Mounting Two E5810s/E5818s (see other side to rack mount single
E5810/E5818)
1. Remove both rubber bumpers from the E5810/E5818.
2. Using Pozidriv screwdriver, install a Lock Link (A) on each E5810/E5818 with a Flathead Screw (G). Then, slide
the two E5810s/E5818s together so the Lock Links interconnect. See detail “A”.
3. Using Pozidriv screwdriver, remove the screw at the rear of each E5810/E5818. Then, connect the Rear Bracket
(B) to each E5810/E5818, using the screws you just removed.
4. Using Pozidriv screwdriver, attach Rack Ear-Full Rack (C) to each E5810/E5818 with six M4x10 Panhead Screws
(D).
Parts needed to install two E5810s/E5818s, side-by-side, in a rack:
A
0050-2166
Lock Link
2
E
0515-1367
Screw, Flathead,
M4x8
2
B
E5810-00023
Bracket, Rear
1
C
E5810-00021
Rack Ear - Full Rack
2
F
0570-1581
Screw, Machine
4
D
0515-1114
Screw, Panhead, M4x10
6
G
0590-0804
Nut, Machine
4
Rubber Bumpers
Rubber Bumpers
D etail "A"
G
A
A
D
C
D
C
B
R ear B racket (B) to eac h E 5810, us ing the screw s you just removed.
E
4
