Agilent Technologies AuroraPresto, User Manual

Page: 37 / 266

Section 1 - Preparing to Use
Aurora Presto
Issue 7 - 05/02 2-7
Switching Aurora Presto On and Off
Press the key and hold it down for 1-2 seconds.
When you switch off,
Aurora Presto
stores the current
system settings.
The Welcome Screen
When you switch on
Aurora Presto
, a Welcome screen is
displayed briefly.
The
Select Test Mode
menu is displayed after the
Welcome screen. From the
Select Test Mode
menu you
can select an interface, access the setup menus or begin
testing. For more details about the
Select Test Mode
menu, see The Select Test Mode Menu on page 2-11 .
Changing the Appearance of the Screen
You can make the display easier to read in different lighting
conditions by changing the contrast or switching the
backlight on and off.
Changing the Contrast
-1-
Press and hold + 1 .
Aurora Presto
displays a bar
graph indicating the current contrast.
-2-
Change the contrast to the level you require. To
increase or decrease by one step, press or . To
increase or decrease by 10 steps, press or .
-3-
To choose the currently displayed contrast and close
the adjustment window, press
ENTER .
481801-7.book Page 7 Thursday, May 23, 2002 10:46 AM