Agilent Technologies AuroraPresto, User Manual

Page: 177 / 266

Section 6 - Datalink
Issue 7 - 05/02 4-77
Choosing the duration of the test
You can vary the length of time you want the BERT to run.
-1-
Select
Duration
from the
BERT
setup menu to display
the options.
-2-
Select one of the following and press ENTER .
•
Continuous
—the test runs until you stop it.
Continuous BERT does not need a fail rate, so
the Threshold setting is removed.
• the test length you require from 1 minute, 15
minutes or 1 hour.
•
User Defined
—set a custom test length.
Aurora Presto
displays a
User Def
setting
window.
To set a custom (
User Defined
) test length:
-1-
From the
BERT
setup menu select
Duration
, choose
User Defined
and press ENTER .
The
User Def
window is displayed in the
BERT
setup
menu.
-2-
Select
User Def
and press ENTER .
Enter the length in hours, minutes and seconds (two digits
for each), and press
ENTER . The maximum length you can
enter is 99:59:59.
481801-7.book Page 77 Thursday, May 23, 2002 10:46 AM