Agilent Technologies 969-9462, User Manual

Page: 263 / 306

Technical Information
Optional Serial Port
17
Window-Based Protocol
The following table, valid for the RS 232, RS 422 and RS 485
interfaces, describes each single window used in the protocol.
Tab. 7
WIN R W T Description
000 X X L START/STOP
001
X X L LOW SPEED [0=OFF / 1=ON]
100 X X L SOFT START [0=NO / 1=YES]
101 X X L DEAT TIME [0=NO / 1=YES]
102 X X L PROCESS GAS [0=Argon / 1=Air] Default Argon
103 X X N SPEED THRESHOLD
104 X X N RUN UP TIME (0÷359.999 sec)
106 X X N HIGH SPEED ADJUST
107 X X N MODE (0, 1, 2) [FRONT, REMOTE, SERIAL]
108 X X N BAUD_RATE (0-4) [600, 1200, 2400, 4800, 9600]
109 X L PUMP LIFE RESET (TYPE “ON” TO RESET)
200 X N CURRENT [ A]
201 X N VOLTAGE [ V]
202 X N POWER [ W]
203 X N FREQUENCY [ Krpm]
205 X N PUMP STATE (0÷6) [STOP, WAITING INTERLOCK,
STARTING, NORMAL, HIGH LOAD, FAILURE,
APPROACHING]
206 X N ERROR CODE (0÷7) [NO ERROR, OVERVOLTAGE,
SHORT CIRCUIT,CHECK CONN.,
207 X L STATE K1 [0=OFF / 1=ON]
208 X L STATE K2 [0=OFF / 1=ON]
209 X N UPPER BEARING TEMPERATURE (0÷90) [ °C]
210 X N LOWER BEARING TEMPERATURE (0÷90) [ °C]
Turbo-V 2000HT Controller User Manual / 87-900-913-01 (O) 263/306