690
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_rearpanel_con.fm
Rear Panel Connectors
LAN PORT
This RJ-45 connector provides connection for down loading firmware upgrades, or new test applications into
the test set. No other types of communication are possible with the LAN port.
PRINTER
Not functional for this release.
SERIAL 1
Not functional for this release.
SERIAL 2
Not functional for this release.
SERIAL 3
Not functional for this release.
TEST SET SYNCH IN
Not functional for this release.
TEST SET SYNCH OUT
Not functional for this release.
TIMEBASE ADJUST
This is the timebase adjust cover, removing this screw allows access for timebase adjustment.
TRIG IN
Not functional for this release.
TRIG OUT
This BNC connector allows for synchronization of the test set to other equipment and is configured by setting
Frame Trigger Parameters.
VGA OUT
This DB-15 connector allows the user to simultaneously route the test set’s display to another monitor.