478
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_initiate.fm
INITiate
INITiate:<measurement mnemonic>[:ON]
Function
These commands initiate (start) the following measurements:
• AFANalyzer - Audio Frequency Analyzer measurement
• ATXPower - Analog Transmitter Power
• CAPPower - Access Probe Power measurement
• CCTPhase - Code Channel Time/Phase error measurement
• CPOWer - Channel Power measurement
• CFERror - Frame Error Rate measurement
• CFERror - Frame Error Rate measurement
• CTXSpurious - TX Spurious Emissions measurement
• FM - Frequency Modulation measurement
• FSTability - Frequency Stability measurement
• GPOWer - Gated Power measurement
• HWQuality - Handoff Waveform Quality measurement
• SAUDio - Swept Audio measurement
• TFERror - TDSO Frame Error Rate measurement
• WQUality - Waveform Quality measurement
This command also queries the active state using the ON? keyword in place of a measurement
mnemonic.
The INITiate command is associated with the SETup
and the
“FETCh? Subsystem” on page 414
.
One or more measurements can be initiated with the same program line (see
and the Programming Example below).
This command is also used to activate a measurement. See
“INITiate Programming Examples
(how INIT commands are used)” on page 474
.
Range AFAN|ATXP|CAPP|CCTP|CFER|CPOW|CTSX|DAP|FM|FST|GPOW|HWQ|SAUD|
TFER|WQU|NONE
Programming Example
OUTPUT 714;"INITIATE:CPOWER;WQUALITY:ON"
!Initiates a channel power and a waveform quality measurement.