Agilent Technologies 8960 Series 10 Reference Manual Download Page 315

Page: 315 / 614

315

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_fberror.fm

FETCh:FBERror

FETCh:FBERror[:ALL]?

FETCh:FBERror:BITS?

Function

Queries the fast bit error measurement. Query returns integrity indicator, bits tested, bit error
ratio, and bit error count.

Bit error ratio is displayed in the Fast Bit Error field. The other values returned by this query are
not available on the front panel display.

Query

Integrity indicator:

• Range: 0 to 16

• Resolution: 1

Bits tested:

• Range: 1 to 999,455 and 9.91 E+37 (NAN)

• Resolution: 1

Bit error ratio:

• Range: 0 to 100 and 9.91 E+37 (NAN)

• Resolution: 0.01

Fast bit error count:

• Range: 1 to 999,455 and 9.91 E+37 (NAN)

• Resolution: 1

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Function

Queries the total number of information bits tested during the last fast bit error measurement.
See

“SETup:FBERror:COUNt” on page 394

Queries the total number of information bits tested during the last fast bit error measurement.
See

“SETup:FBERror:COUNt” on page 394

This value is not available on the front panel display.

Query

Range: 1 to 999,455 and 9.91 E+37 (NAN)

Resolution: 1

XXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Summary of Contents for 8960 Series 10






































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8960 Series 10

Reviews:

Related manuals for 8960 Series 10

Brands by name

Popular brands

Agilent Technologies 8960 Series 10, Reference Manual

Search results

Summary of Contents for 8960 Series 10

Reviews:

Related manuals for 8960 Series 10

Brands by name

Popular brands