manualshive.com logo in svg

Agilent Technologies 8712ET/ES, Quick Start Manual, Page: 2 / 4

Share
Download
Agilent Technologies 8712ET/ES Quick Start Manual Download Page 2

-2-

4. Connect the equipment.

5. Interpret the measurement / save results.

If Measurement Results Were Poor

The following results indicate a specific problem you may encounter. Refer to your Option 100 User’s
Guide Supplement for more information.

Problem

Solution

The measured amplitude and distance of a 1000
ft. cable are wrong. (Cable is not terminated in
this example.)

Change the “velocity factor” and “cable loss”
values to the values specified by the cable
manufacturer.

MARKER

 Marker Search  Max Search

Search

 Mkr

−

> Max

SAVE RECALL

 Define Save  Data ON

 Prior Menu  Save State

CAL

 Velocity Factor  Cable Loss

Summary of Contents for 8712ET/ES

Page 1: ...so please refer to your analyzer s User s Guide for safety warranty and assistance information NOTE This quick start guide assumes the use of an 8712ET or 8714ET If you are using an 8712ES or 8714ES some key presses and displays will be slightly different To Make a Fault Location Measurement 1 Choose the measurement parameters or recall an instrument state 2 Reduce the interference 3 Calibrate the...

Page 2: ...ser s Guide Supplement for more information Problem Solution The measured amplitude and distance of a 1000 ft cable are wrong Cable is not terminated in this example Change the velocity factor and cable loss values to the values specified by the cable manufacturer MARKER Marker Search Max Search Search Mkr Max SAVE RECALL Define Save Data ON Prior Menu Save State CAL Velocity Factor Cable Loss ...

Page 3: ...3 Connect the equipment or 4 Interpret the measurement save results 5 View SWR save results PRESET MEAS 1 Reflection S11 AVG System Bandwidth Narrow 250 Hz CAL 1 Port User 1 Port MARKER Marker Search Min Search Mkr Min SAVE RECALL Define Save Data ON Prior Menu Save State FORMAT SWR SCALE Scale Div 0 2 ENTER SAVE RECALL Save State ...

Page 4: ...te insertion loss and end of cable Insertion Loss Calculation marker value 2 7 36 dB 2 3 68 dB End of Cable Calculation λ 2 where λ wavelength c Vf f f 10 MHz between bumps Vf velocity factor 1 0 c 109 ft sec λ 109 ft sec 107 cycles sec 100 ft 100 ft 2 50 ft PRESET MEAS 1 Reflection S11 AVG System Bandwidth Narrow 250 Hz CAL 1 Port User 1 Port MARKER 900 MHz SAVE RECALL Define Save Data ON Prior M...

Reviews:

No comments