Agilent Technologies 8698961R001, User Manual

Page: 257 / 294

Technical Information
How to Connect the Open-Collector Inputs of the Controller
17
Turbo-V 1K-G Retrofit User Manual / 87-900-996-01 (B) 257/294
How to Connect the Outputs of the Controller
The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller. The figure
example refers to the programmable set point signal on pins 11 and 9.
Figure 18 Typical output connection
P2 – Serial
Figure 19 9 pin connector
This is a 9 pin D-type serial input/output connector to control via an
RS 232 or RS 485 connection the Turbo-V 1K-G Retrofit.