Agilent Technologies 86038B User Manual Download Page 121

Page: 121 / 350

Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition

121

Scale to Fit

Selected Trace

Performs an auto scale for the selected trace on

the selected graph only.

Selected Graph

Performs an auto scale for the selected graph

only.

All Graphs

Performs an auto scale on all graphs.

Offset GD trace to zero at:

Group delay traces are relative measurements. Depending on
the device, you can set the zero point to one of the following
options.

• Center Point

• Minimum Point

• Maximum Point

• No Offset

Autoscale During Measurement

For Swept measurements, an

autoscale is performed on all graphs at the end of a
measurement.

For Stepped measurements, an autoscale on all graphs is
performed at the end of each wavelength increment.

Marker Setup

Show Markers

Turns the marker functions on or off.

Tip:

Toggle the markers off, then on to reposition the markers

near the center of the viewable range.

Marker Position

Allows you to enter in a specific wavelength for both marker 1
and marker 2.

Tip:

If markers are turned on, the curve fit function will only

apply to the region of the trace that is between the markers.
Refer to

“Curve Fit” on page 127

for more information.

Summary of Contents for 86038B































































































































































































































































































































































Search results

Summary of Contents for 86038B

Reviews:

Related manuals for 86038B

Brands by name

Popular brands

Agilent Technologies 86038B, User Manual

Search results

Summary of Contents for 86038B

Reviews:

Related manuals for 86038B

Brands by name

Popular brands