Agilent Technologies 8560 E-Series, Quick Reference Manual

Page: 164 / 196

Programming Commands (alphabetical index)
|R|
RB [ ] <real >< frequency units >) j (UP j DN jEP j O Aj A UTO j MAN) j ?;
Sp ecies the resolution bandwidth.
<real >::=10 Hz to 2 MHz
UP/DN incremen t::= 1, 3, 10 sequence
OUTPUT 718;"SP 1 MHZ;RB 1 MHZ;TS;"
Query resp onse: <n umeric data format >< LF with EOI >
OUTPUT 718;"RB UP UP;RB?;"
ENTER 718;Res_bw
RBR [ ] <real >j (UP j DN j EP jO A) j ?;
Sp ecies the ratio b et w een the resolution bandwidth and the frequency
span. If the span is c hanged, the resolution bandwidth will c hange to
maintain the ratio.
<real >::=0.002 to 0.100
UP/DN incremen t::= 2, 5, 10 sequence
OUTPUT 718;"RBR .3;SP 100KHZ;TS;"
Query resp onse: <n umeric data format >< LF with EOI >
OUTPUT 718;"RBR DN DN DN;RBR ?;"
ENTER 718;Rbw_ratio
RCLOSCAL ;
Recalls a v eraged op en/short reference trace data in to trace B.
!assume a valid reference trace is stored
OUTPUT 718;"IP;"
OUTPUT 718;"RCLSOCAL;TS;DONE?;"
ENTER 718;Done
OUTPUT 718;"NORMLIZE ON;TS;DONE?;"
ENTER 718;Done
LOCAL 718
5-74 Programming Reference