Agilent Technologies 85097B, Reference Manual, Page: 11 / 25

Chapter 1 1-7
General Information
VNA Interface Kit Setup and Operation
Figure 1-2 Interface Connection to ECal Module
Figure 1-3 VNA-Based ECal System
• ECal modules can be connected (or disconnected) when the analyzer is turned on or off,
but must remain connected while data transfer is in progress.
• After completing a calibration, the ECal module or modules can remain connected to
the interface unit.
• With the appropriate interface cable, RF or microwave ECal modules can be connected
to position A or B of the interface unit.