Agilent Technologies 85025A, User'S And Service Manual, Page: 25 / 98

3
Operation
Caution
Electrostatic discharge (ESD) can damage the highly sensitive
circuits in this device; charges as low as 100 V can destroy
your detector .
ESD damage occurs most often as you connect or disconnect
a device . Use this detector at a static-safe workstation and
wear a grounding strap . Never touch the input connector
center contacts or the cable contact pins .
Do not apply more than +20 dBm RF power or more
than 610 VDC to the detector . Higher power/voltage can
electrically damage the detector .
Before you connect a RF cable to the detector , always
discharge the static electricity that may have accumulated
on the cable's outer conductor to instrument ground. This is
most important if the cable is very long or connected to a
large antenna.
Do not drop the detector or subject it to mechanical shock.
Agilent 85025A/B/D/E Operation 3-1