Agilent Technologies 6571A, Service Manual

Page: 151 / 161

Backdating 15
1
Line Cord, 10ga. Canadian with NEMA 6- 30P plug from Option 944 to Option 844.
Line cord family drawing C-8120-9296-lB from Rev. B to Rev. C .
CHANGE 22
In Table 5-11:
CHANGE:
Capacitor Metalized Polyester Dielectric from 1.0
µ
F 20% Agilent P/N 0160-4962 to 1.0
µ
F Agilent P/N 0160-7606 Qty. 1.
(Circuit Ref."C452, C30, C33, C1, C5, C133, C137, C5, C8, C9 ,C500-C502, C420, C421, C423, C497, C498").
CHANGE 23
In Table 5-10:
CHANGE: Q201-204, 211, 222, 233, 244 from POWER FET Agilent P/N 1855-0849, Qty. 8 to FET-MACHED Set
Agilent P/N 5080-2241 QTY 1.
CHANGE 24
In Table 5-6:
CHANGE: Diode-Zener. VR102, FROM 11V 2% Agilent P/N 1902-3172 to 11V 5% Agilent P/N 1902-0959 Qty, 1.
CHANGE 25
In Table 5-9:
CHANGE: Microprocessor, U504, from Programmed Agilent P/N 5080-2155 to Masked Agilent P/N 1820-8600, Qty. 1.
CHANGE 26
In Table 5-9:
ADD: Label-Fuse warning Agilent P/N 7120-4827, Qty 1 (For 6002A only- Qty. 2).
CHANGE 27
In Table 5-9:
CHANGE: Thermistor, 10K @25C, Reference Designator 0837-0397 to Agilent P/N 0837-0412, Qty 1.
CHANGE 28
In Table 5-11:
CHANGE: Microprocessor, U504, from programmed (Fabricated) Agilent P/N 1820-5996 to Mask (Purchased) Agilent
P/N 1821-0223 Qty. 1.