© Agilent Technologies
1999, 2009
All Rights Reserved.
Reproduction, adaptation, or
translation without prior
written permission is
prohibited, except as allowed
under the copyright laws.
Restricted Rights Legend.
Use, duplication or disclosure
by the U.S. Government is
subject to restrictions as set
forth in subparagraph (c) (1)
(ii) of the Rights in Technical
Data and Computer Software
clause at DFARS 252.227-
7013 for DOD agencies, and
subparagraphs (c) (1) and (c)
(2) of the Commercial
Computer Software Restricted
Rights clause at FAR 52.227-
19 for other agencies.
Document Warranty
The information contained in
this document is subject to
change without notice.
Agilent makes no warranty
of any kind with regard to
this material, including, but
not limited to, the implied
warranties of
merchantability or fitness
for a particular purpose.
Agilent shall not be liable for
errors contained herein or for
damages in connection with
the furnishing, performance,
or use of this material.
Product Warranty
This Agilent product has a
warranty against defects in
material and workmanship for
a period of three years from
date of shipment. During the
warranty period, Agilent will,
at its option, either repair or
replace products that prove to
be defective.
For warranty service or repair,
this product must be returned
to a service facility designated
by Agilent.
For products returned to
Agilent for warranty service,
the Buyer shall prepay
shipping charges to Agilent
and Agilent shall pay shipping
charges to return the product
to the Buyer. However, the
Buyer shall pay all shipping
charges, duties, and taxes for
products returned to Agilent
from another country.
Agilent warrants that its
software and firmware
designated by Agilent for use
with an instrument will
execute its programming
instructions when properly
installed on that instrument.
Agilent does not warrant that
the operation of the
instrument software, or
firmware will be
uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall
not apply to defects resulting
from improper or inadequate
maintenance by the Buyer,
Buyer-supplied software or
interfacing, unauthorized
modification or misuse,
operation outside of the
environmental specifications
for the product, or improper
site preparation or
maintenance.
No other warranty is
expressed or implied.
Agilent specifically
disclaims the implied
warranties of
merchantability or fitness
for a particular purpose.
Exclusive Remedies
The remedies provided herein
are the buyer's sole and
exclusive remedies.
Agilent shall not be liable for
any direct, indirect, special,
incidental, or consequential
damages, whether based on
contract, tort, or any other
legal theory.
Assistance
Product maintenance
agreements and other
customer assistance
agreements are available for
Agilent products.
For any assistance, contact
your nearest Agilent Sales
Office.
Certification
Agilent certifies that this
product met its published
specifications at the time of
shipment from the factory.
Agilent further certifies that
its calibration measurements
are traceable to the United
States National Institute of
Standards and Technology,
to the extent allowed by the
Institute's calibration facility,
and to the calibration facilities
of other International
Standards Organization
members.
34134A.book Page 0 Wednesday, March 25, 2009 4:09 PM
