8
34134A AC/DC DMM Current Probe
Calibration
Calibration
To guarantee that your instrument complies with the factory specifications, we
recommend that the 34134A Current Probe be submitted to your local Agilent
Service Center at one year intervals for recalibration, or as required by other standards.
Repair
This probe contains no user serviceable parts. Please return to your local Agilent
Service Center for repair.
To check/replace the battery
When the probe is turned on, the green LED should light up. If not, replace the 9 V
battery.
1 Disconnect the probe from the circuit and the DMM.
2 Turn the probe “OFF.”
3 Unscrew the battery compartment screw and pull out the battery compartment
cover.
4 Replace the battery and put the cover back up.
CAUTION
Do not replace the battery while the probe is in use.
Cleaning the probe
Be sure that the mating surfaces of the jaw are free of dirt or foreign matter. If they are
rusted, gently clean with a soft, lightly oiled cloth.
34134A.book Page 8 Wednesday, March 25, 2009 4:09 PM
