Agilent Technologies 339B, Technical Overview

Page: 8 / 9

7
Test Fixtures/Accessories
Agilent 16339A component test fixture
For manual high voltage testing of
discrete components. For 4339B only.
Agilent 16117B low noise test leads
Wide jaw clip leads for 4339B. 1 meter
cable. Applicable measurement range:
≤
1 x 10 11
Ω (
typical
)
. For 4339B only.
Option 16117B-001 adds a pair of
pin-type probes. Option 16117B-002
adds a pair of socket adapters for
connecting to a custom made fixture.
Option 16117B-003 adds a pair of
alligator clips.
Agilent 16117C low noise test leads
Interlock, voltage source, and current
sensing cables. Terminations are
threaded triaxial, standard BNC, and
bare interlock pair. Female BNC and
triaxial connectors are included. For
4339B only.
Agilent 16118A tweezer test fixture
Tweezer test fixture for easy testing
for chip components. Maximum
applied voltage: 100 Vdc. Applicable
measurement range:
≤
1 x 10 11
Ω
(typical). For 4339B only.
Agilent 16008B resistivity cell
For resistivity measurements of dry
sheet samples. Upper electrode is
spring loaded to apply pressure.
Surface and volume measurements.
Installed with 50 mm diameter elec-
trode. Option 16008B-001 adds
26 mm/76 mm diameter electrodes.
Option 16008B-002 adds 26 mm
diameter electrode. For 4339B only.
Maximum applied voltage: 1000 Vdc.
Sheet thickness range: 10
µ
m to
100 mm.
Agilent 16117E low noise test lead
Male-triaxial to male-triaxial connec-
tors. One meter cable. One female-
triaxial connector included. For
4349B only.
Option 16117B-001
Option 16117B-003
Option 16117B-002