Agilent Technologies 16092A, Operation And Service Manual, Page: 2 / 18

2
Notices
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright.All rights
are reserved. No part of this document may be photocopied, reproduced, or translated to
another language without the prior written consent of the Agilent Technologies.
Agilent Technologies Japan, Ltd.
Kobe Instrument Division
1-3-2, Murotani, Nishi-Ku, Kobe-shi, Hyogo, 651-2241 Japan
© Copyright Agilent Technologies Japan, Ltd. 1986, 1998, 2000
Manual Printing History
The manual’s printing date and part number indicate its current edition. The printing date
changes when a new edition is printed. (Minor corrections and updates that are
incorporated at reprint do not cause the date to change.) The manual part number changes
when extensive technical changes are incorporated.
December 1986 First Edition (part number: 16092-90000)
November 1998 Second Edition (part number: 16092-90010)
February 2000 Third Edition (part number: 16092-90010)
Safety Summary
The following general safety precautions must be observed during all phases of operation,
service, and repair of this instrument. Failure to comply with these precautions or with
specific WARNINGS elsewhere in this manual may impair the protection provided by the
equipment. In addition it violates safety standards of design, manufacture, and intended use
of the instrument.
The Agilent Technologies assumes no liability for the customer’s failure to comply with
these requirements.
NOTE 16092A comply with INSTALLATION CATEGORY II and POLLUTION DEGREE 2 in
IEC61010-1. 16092A are INDOOR USE product.
• Ground The Instrument
To avoid electric shock hazard, the instrument chassis and cabinet must be connected
to a safety earth ground by the supplied power cable with earth blade.
• DO NOT Operate In An Explosive Atmosphere