Agilent Technologies 16092A, Operation And Service Manual, Page: 18 / 18

18 Chapter 2
Service
Maintenance
CLEANING APC-7 CONNECTORS.
The APC-7 connector contact surface of the UNKNOUN terminal terminations and test
fixtures must be kept clean, i.e. free of dust oil or any foreign matter which will prevent
good contact. To maintain clean contact surfaces, it is recommended that the operator
perform periodic cleaning as necessary. Use a lint-free cloth and if a cleaning fluid is
needed, use isopropylalcohol.
CAUTION Do not use aromatic or chlorinated hydrocarbons, esters, ethers, terpenes, higher alcohols,
ketones, or such chemicals as benzene, toluene, turpentine, dioxane, gasoline, cellulose
acetate, or carbontetrachloride. Keep exposure of the connector parts to both the cleaning
fluid and its vapors as brief as possible.